|
|
Heating multifunctional building
Čajčíková, Jolana ; Horák, Petr (referee) ; Počinková, Marcela (advisor)
The theme of this bachelor´s thesis are problems of condensing gas boiler rooms in the theoretical part and heating multifunctional building in the calculation part. The four-floor multifunctional building is situated in Brno in a slightly built-up area and includes commercial units, classrooms and administrative units for rent, an IT company and a restaurant for 120 people situated in the fourth floor. The heat source for this building is a gas condensing boiler room. The heating surface consists of steel panel radiators. There is forced ventilation installed in the building.
|
|
|
The building
Kříž, Lukáš ; Sedlák, Radek (referee) ; Benešová, Romana (advisor)
The subject of the diploma thesis is to prepare project documentation for the construction of a multifunctional building with almost zero energy consumption. The multifunctional building is located in the South Moravian Region on the outskirts of Rosice. It is a five-storey detached multifunctional building in a slightly sloping terrain, with one underground floor and four above-ground floors. The underground floor serves for the most part as a collective garage and also for the technical background of the building. There is a gym and showroom on the first floor. On the second and third floors there are office spaces with the necessary facilities. The remaining fourth floors are used for living, there are designed four residential units, with storage space for each apartment. The building is designed as a combined construction system, while the perimeter vertical load-bearing structures are lined with ceramic hollow blocks. The perimeter load-bearing walls in the basement are made of lost formwork. The vertical load-bearing structures inside the building consist mainly of reinforced concrete monolithic columns. The ceiling structures and longitudinal girders are also monolithic reinforced concrete. The perimeter masonry is insulated with the ETICS contact thermal insulation system. The building is based on reinforced concrete monolithic foundation strips. The roof consists of a flat single-skin vegetation roof.
|
|
|
Multifunctional building Litomyšl
Kovář, Lukáš ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
Diploma thesis deals with the design of the multifunctional building located between Havlickova and F. Vogner streets in relation to the existing building in Litomyšl. Building plot is slightly sloping, at the rear goes into greater inclination. The building has four aboveground floors and one underground floor. The building includes services, located in ground floor, administrative premises decomposing in the second and third floor and apartments on the top floor. In the basement are located parking spaces. Supporting skeleton of the building is a cast-in-place concrete frame. Roofs are designed as a flat single shell. In part of roof over third floor is a green roof. The building is founded on piles. Due to the occurrence of water pressure is building an extra solved waterproofing system with checks and activation. The work includes text messages, drawings for building construction, fire safety design, construction and physical assessment of building structures and specialization from concrete structures.
|
|
|
Conversion of Vlněna boiling-room
Gebauer, Pavel ; Štikar, Jaroslav (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
The Bachelor thesis deals with the reconstruction and restoration of the building which is part of Vlněna complex in Brno. Location, in which is the object situated, is undergoing an extensive/large modernisation. Almost all historic buildings of this industrial complex are being replaced with high-rise administration blocks which deviate from historical context of the area. One of those exceptions, is also the object of this thesis. It is a former heating building that supplied energy to a mentioned complex. The attempt of the design was maximal purification from contemporary and purely functional interventions in order to support the historical footprint which is a fundamental factor for revitalization of the remaining parts of the area. The building is, in its own way, a manifestation of its surroundings. The object was cleansed to its visible structure made of bricks and wooden beam ceilings. This is refering to a time when these materials were understood as an essential costruction of every building, until they were replaced with structures from reinforced concrete and transparent facades with purely functional approach, which is visible in this new vision of Vlněna complex. Considering the administration aspect of the rest of the area, the building with its functional usage is trying to stimulate life and by that add space for social facilities. The object poetically named “the centre of regeneration“ includes many ways of relaxation which is an integral element to a monotone activities of administration buildings. The lower parts of the building contain a social function in the form of mini-brewery with beer hall/cellar, and restaurant in second floor. The other floors then offer regeneration, mental and physical, from massages to yoga practice. The result of this thesis is a revitalizational boost of the area. The object, in its function and form, is an opposite of new modern part of the complex. However, the object should not be unders
|
|
|
Sanitation installation and gas installation in a multifunctional building
Peřinová, Jitka ; Vaščáková, Alena (referee) ; Vrána, Jakub (advisor)
The task of the Bachelor's thesis is to develop a design of sanitary and gas installations in a given multifunctional building. The building has no basement and has four floors. In the first floor there is a bistro and a accommodation in the second floor. One dwelling unit is spread over the third and fourth floors. The theoretical part focuses on grease traps. I focus on their main functions, the choice of nominal size, montage and types of traps. The computational part contains all calculations used in the design of sewerage, water and gas pipelines, including their connection to utilities.
|
|
|
Multifunctional building
Prokop, Radek ; Kantořík, Petr (referee) ; Utíkalová, Ivana (advisor)
My diploma thesis deals with project a multifunctional building. My project corresponds to the scope of documentation for the execution of construction. Building hat five floor and construction roof is green roof, single-layer flat roof. Construction systém is cast-in-place concrete frame. In basement is technical facilities and parking place. In ground floor is shop place and parking floor. In first floor is office place. In third and fourth floor are flats. Building foundations are bored cast in place pile – method CFA.
|
|
|
Heating of the Multifunctional Building
Konečný, Ladislav ; Topič, Jan (referee) ; Vendlová, Lucie (advisor)
This diploma thesis proposes the heating system and ventilation in mixed-use building. The building is located in Uherské Hradiště. The object of this work is the selection of appropriate variants of two heat sources (gas boilers and solid fuel boiler). The project is focus on design of the heating system chosen mode of heating, which are gas boilers and the concept of forced ventilation. The theoretical part is focused on the regulation.
|
|
|
Multifunctional building
Polický, Jan ; Tichomirov, Vladimír (referee) ; Novotný, Miloslav (advisor)
Project solves seven-storey building with basement in urban area. Object mainly consists of building and private parking area. Functionally, the building is divided into parts for commercial, administrative and housing. The shape of the building is terraced with flat roof. Structural systém is a frame with locally supported ceilings founded on reinforced concrete slab supported by piles. The building envelope is partly of ceramics blocks, concrete wtih ETICS and curtain wall. The aim of project is to create documentation for realization based on building physics solution.
|
|
|
NEW ON THE „OLD“ – Brno, Bratislavská - Stará Corner
Kuda, Daniel ; Zadražilová, Miroslava (referee) ; Pelčák, Petr (advisor)
Multifunctional building is located in a vacant lot on the corner of Bratislavska and Stara streets in district Zábrdovice of Brno city. The main purpose of the building is to create conditions for the revival of declining district near the center, which is achieved by the proposed functions of gallery, studios, cafe and housing. The design works with public space and private atriums in a combination with residential galleries. Special attention was paid to the facade of the house to fit between the richly decorated buildings of the 19th century.
|
|
|
Multifunctional building
Svoboda, Petr ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
This diploma thesis deals with the design of multifunctional building in Tábor in cadastre unit of Klokoty. It is a detached building with one underground floor and three above-ground floors on a flat terrain. The building is rectangular shape where the underground floor is a collective garage at the ground floor are shops a hairdresser and a café and at the last two floors are office spaces. The building is designed as frame systém with infill ceramic masonry with additional insulation. The roof is designed as a flat roof.
|
guest ::
